Important Notes Before You Start:
- This procedure requires one working ignition key
- This procedure works with the following vehicles: Chevrolet Venture, Oldsmobile Silhouette, and Pontiac Montana
Programming Instructions
- Ensure that all remotes expected to work for the vehicle are present. Any remotes that are not present will stop functioning until they are reprogrammed
- Remove the key from ignition cylinder
- Unplug the BCM PRGRM fuse or MALL PGM fuse from the fuse box (you only need to remove one fuse)
- Close all doors
- Insert the key in ignition cylinder and turn it to "ACC" position by turning it counterclockwise
- Within 1 second, turn the key to "OFF" position then back to "ACC" position
- Open the driver's door
- Close the driver's door
- A chime will sound indicating that the vehicle has entered the programming mode
- Press and hold the door "LOCK" and "UNLOCK" buttons on the remote for up to 15 seconds
- Two chimes will sound indicating that the remote has been successfully programmed
- Repeat step 10 for the remaining remotes including the working remotes
- To exit the programming mode, please remove the key from ignition cylinder
- Plug the fuse that was removed in step 3
- Test all remotes
Helpful Links
